- Compatible with YU4, YU6 bookshelf speakers
For use with your existing model. - Solid steel structure
Built from solid steel, the stands reduce undesirable resonance by insulating your speakers from the surrounding area. - Rotating top-plate
Adjust the position of the top plate to ensure your speakers are always angled towards you. - Foam insulation
Covers the entire top surface of each stand, helping to reduce vibrations and improve overall sound quality. - Interchangeable feet
Spiked feet are provided to keep the stands planted securely on carpet. To avoid damage to hardwood flooring, circular rubber feet are also included. - Cable management
Hollow support towers allow you to route your power cable and speaker wire, ensuring they remain concealed. - Mounting hole
The SP series features a mounting hole and 1/4″ – 20 screw that allow you to secure YU4, YU6 or other compatible speakers in place. - Two-pack
Enables use with a pair of speakers. - Assembly required.
- Put it all together with our professional in-home assembly service
-36%
Kanto – SP Plus Speaker Stands (2-Pack) – Black
$91.00 Save:$51.00(36%)
Available in stock
Description
Additional information
| Weight | 16.3 lbs |
|---|---|
| Dimensions | 8.9 × 5.5 × 10.6 in |
| Stand Material | Metal |
| Product Depth | 8.9 inches |
| Maximum Weight Capacity | 30 pounds |
| Safety Strap(s) | No |
| Color | Black |
| Compatibility | Kanto YU4, YU6 Bookshelf Speakers |
| Number Of Stands | 2 |
| Assembly Required | Yes |
| Cord Storage | Yes |
| Integrated Mount | Yes |
| Stand Type | Freestanding |
| Product Height | 10.6 inches |
| Manufacturer's Warranty - Labor | 2 years |
| Electrical Outlet | No |
| Product Name | SP Plus Speaker Stands (2-Pack) |
| Cabinet Included | No |
| Brand | Kanto |
| Color Category | Black |
| Manufacturer's Warranty - Parts | 2 Years |
| Product Weight | 16.3 pounds |
| Product Width | 5.5 inches |
| Stackable | No |
| Model Number | SP32PL |
| Rear Panel | Yes |
| Foldable Design | Yes |
| UPC | 800152717494 |
Reviews (12)
No products in the cart. 
Andy –
Bought these when we were having trouble getting the “official” stands from Definitive Technology and they’ve worked out great. Only took a few minutes to assemble. Wires ran nicely up the tube and the speakers attached securely to the top.
Love that the stands have some weight to them and I don’t have any worries about them knocking over. Plus, they’re the perfect height to pair with our TV, which is sitting on a stand.
Would definitely buy these again if I’m in the market for a well made pair of stands.
dvdwilly –
Well designed, well constructed. Rock solid (literally…) about 16-17 pounds each. Well designed wire management.
If you use the large top plates, be aware that they are not reversible. I found out because I had one plate with the Kanto logo forward and the other with it backward. It caught my eye because that left a different amount of space from the wall. Reversed the plate with the backward logo and all is right with the world.
Reallynotnick –
Really everything from the packaging to the design and use of the product has been thought through.
Having the speaker wire able to run through the stands keeps the stands having a great minimalistic modern look.
The two sized top plates and the ability to rotate them up to 45 degrees when using the furthest wholes make speaker placement super easy. They also have a nice foam top that won’t scratch the speakers and provides a bit of friction (if you have the matching Kanto speakers you can even screw them into the stands making them impossible to knock off, there are probably other brands with that too but rest assured it’s not needed just a nice bonus)
I feared these might be too light of speaker stands but rest assured they are more than heavy enough and have a really nice powder coat finish across the stands.
I have these on my Elac B4’s and love them. Only complaint I had is on the rubber feet for the hard floor the rubber covered the last thread on 2 of the feet but it was really easy to remove with a tweezer in a few seconds once I realized that was why they wouldn’t screw in all the way (see the photo attracted where the middle one is proper). Obviously the carpet spikes won’t have this issue.
Bear –
Very sturdy and all steel. They really were not made for the speakers I have (Klipsch), but they work very well. I just wish the larger plate was just a little larger (Yes they come with 2 plates). I recommend them and would buy them again in a snail’s breath. I bought them them thru Best Buy, but they were out of stock, Got them in about 5 business days. The wait was well worth it. You get what you pay for and you can pay a lot more for something that may not work for you. Study the specifications and speak with them if you can or contact Best Buy or Crutchfield about them.
MaxedMac –
These are the best stands I’ve ever owned. They are solid (ALL METAL), heavy (which you really want in a speaker stand), aesthetically appealing as the finish is impeccable, they give you both the rubber feet (for tile floors) and spikes (Carpet) on top of all that they built in cable management that is completely invisible. Took a while to find these but they were worth the search! These were also very easy to put together.
cardsfan252 –
These stands are absolutely fantastic, they do a great job of concealing cables and they are rock solid. Highly recommended.
lghtanddrk –
Very sturdy and provides lots of options to attach speakers.
FTBP –
Perfect for listening to speakers (kanji YU 6) at the right listening height. Solid bottom base plates and speaker plates – attractive and professional devices.
Allmine –
The stand is a perfect fit for the NHT speakers. No issues.
Alex –
Sturdy, Great Quality…Looks really nice.
Makes a difference to your surround rear speakers.
GregG –
I love the speaker stands and planning on buying more.
SeanS –
The stands were very easy to assemble and took only about 5 minutes. The one gripe that i have about them is that you have to adjust the feet for it to be stable.